Corten Steel Products
Home  Products Corten Steel Products
Our company has been supplying Corten Steel Products to various industries. These corten steel products are available in the form of sheets and plates. These Corten Steel Plates and Sheets, offered by us, are procured from prominent manufacturers, who have been working in this field for a long time. These products are made from excellent quality steel to assure long life and unmatched quality. We supply these products to various industries in bulk that has gained us the reputation of one of the reliable Corten Steel Sheets Suppliers.
Such as :- 63SA 588 Gr.A - Plates, Tubes, Pipes, Ingots, Steel, Sheets, Coils, Conductors,
SA 588 Gr A (Corten)
- Length (mm) : 9000
- Width (mm) : 2000
- Thickness (mm) : 10
- Qty (nos) : 20
Chemical Composition :
- The Heat Analysis shall conform to the requirements as prescribed in Table 1 mentioned below.
- The steel shall conform on product analysis to the requirements prescribed in Table 1, subject to product tolerance in Specification A 6 / 6M.
- The atmospheric corrosion – resistance index, calculated on the basis of the heat analysis of the steel, as described in Guide G 101- Predictive Method based on the Data of Larabee and Coburn, shall be 6.0 or higher
|
Chemical Requirements (Heat Analysis)
| | % Composition | | | | Element | Grade A | Grade B | Grade C | Grade K | | Carbon A | 0.19max | 0.20 max | 0.15 max | 0.17 max | | Manganese A | 0.80-1.25 | 0.75-1.35 | 0.80-1.35 | 0.50-1.20 | | Phosphorous | 0.04 max | 0.04 max | 0.04 max | 0.04 max | | Sulphur | 0.05 max | 0.05 max | 0.05 max | 0.05 max | | Silicon | 0.30-0.65 | 0.15-0.50 | 0.15-0.40 | 0.25-0.50 | | Nickel | 0.40 max | 0.50 max | 0.25-0.50 | 0.40 max | | Chromium | 0.40-0.65 | 0.40-0.70 | 0.30-0.50 | 0.40-0.70 | | Molybdenum | | | | 0.10 max | | Copper | 0.25 -0.40 | 0.20 -0.40 | 0.20 -0.50 | 0.30 -0.50 | | Vanadium | 0.02-0.10 | 0.01-0.10 | 0.01-0.10 | | | Columbium | | | | 0.005-0.05B |
A For each reduction of 0.01 percentage point below the specified maximum for carbon, an increase of 0.06 percentage point above the specified maximum for manganese is permitted, up to a maximum of 1.50%. B For plates under ½ in (13 mm) in thickness, the minimum columbium is waived. The material as represented by the test specimens shall conform to the requirements for tensile properties as prescribed in Table 2 of the specification. The material test certificates shall be as per EN 10204 3.1.
|
|
|
|
